24 Options Guide RX200 S5
Installing a second processor Processors
© cognitas. Gesellschft für Technik-Dokumentation mbH 2009 Pfad: W:\Anwendungsdaten\FCT\tim_local\work\PICHOL\OBJ_DOKU-4102-001.fm
Inserting the processor
Figure 6: Releasing the lever
Ê Release the socket lever by pressing it sideways and pushing it upwards as
far as it will go (1).
Ê Open the cover (2).
Ê Remove the plastic cover (3).
Figure 7: Inserting the processor
Ê Position the new processor over the socket and then place it carefully into
the socket (1).
V CAUTION!
The processor can only be installed in one particular direction. Note
the marking on one of the corners. To avoid damaging the processor,
do not force it into the socket.
Ê Close the cover (2).
Ê Lock the processor in place in the socket by returning the socket lever to its
original position (3).
1
2
3
1
2
3
To Next Page
Loading...
