RX200 S5 Options Guide 27
Processors Replacing the processor
Figure 10: Removing an old processor
Ê Release the socket lever by pressing it sideways and pull it upward as far as
it will go (1).
Ê Open the cover (2).
Ê Lift the installed processor carefully out of the socket (3).
Figure 11: Inserting a new processor
Ê Position the new processor over the socket and then place it carefully into
the socket (1).
V CAUTION!
The processor can only be installed in one particular direction. Note
the marking on one of the corners. To avoid damaging the processor,
do not force it into the socket.
Ê Close the cover (2).
Ê Lock the processor in place in the socket by returning the socket lever to its
original position (3).
1
2
3
1
2
3
To Next Page
Loading...
