RX2530 M5 Operating Manual 35
iRMC-related status signals
HDD/SSD prefailure detection
Depending on your hardware configuration HDD/SSD prefailure detection will
be supported.
The requirements are:
– iRMC S5 Firmware 1.2 or later
– supported OOB RAID system
ID indicator
Global error
indicator
Description
flashing blue off
A remote connection has been
established. Local VGA output has been
disabled during the remote session.
flashing blue flashing orange
An emergency flash of the iRMC firmware
is in progress.
I For more information on the
emergency flash of the iRMC
firmware, see the "FUJITSU Server
PRIMERGY RX2530 M5 Upgrade
and Maintenance Manual".
To Next Page
Loading...
