Fujitsu PRIMERGY RX2530 M5 - Configuring the Server Without Serverview Installation Manager; Configuring the Server and Installing the Operating System; Configuring the Onboard SAS;SATA Controller; Installing the Operating System

76 Operating Manual RX2530 M5
Starting up
5.7 Configuring the server without ServerView
Installation Manager
5.7.1 Configuring the server and installing the operating
system
5.7.1.1 Configuring the onboard SAS/SATA controller
Ê If applicable, configure the onboard SATA controller, see "Notes on
configuring controllers" on page 77.
Ê If applicable, configure the SAS/SATA RAID controller with MegaRAID
functionality, see "Notes on configuring controllers" on page 77.
5.7.1.2 Installing the operating system
Ê Insert the DVD for the operating system you want to install.
Ê Reboot the server.
Ê Follow the instructions on screen and in the manual for the operating
system.