Fujitsu PRIMERGY RX2530 M5 - Configuring the Controllers; Installing the Operating System

RX2530 M5 Operating Manual 75
Starting up
5.6.1.1 Configuring the controllers
Ê Configure the RAID controllers using the ServerView RAID Manager.
Ê If applicable, configure the onboard SATA controller, see "Notes on
configuring controllers" on page 77.
Ê If applicable, configure the SAS/SATA RAID controller with MegaRAID
functionality, see "Notes on configuring controllers" on page 77.
5.6.1.2 Installing the operating system
I For more information on installing the server, see the
"ServerView Installation Manager" user guide at
http://manuals.ts.fujitsu.com under x86 Servers - Software -
ServerView Suite - Server Installation and Deployment.
Ê Open this manual.
Ê For the remote or local installation, follow the instruction in this manual and
on the screen.
Ê Configure the settings for the general system behavior of the server using
the Server Configuration Manager.