EasyManua.ls Logo

Fujitsu PRIMERGY RX300 S5 - Opening;closing the housing

Fujitsu PRIMERGY RX300 S5
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
106 Operating manual RX300 S5
Opening/closing the housing CSS components
8.3 Opening/closing the housing
V CAUTION!
The actions described in this section may only be performed by
personnel with the appropriate technical training. If the fan cover is
opened without authorization or if repairs are carried out incorrectly, the
user may be exposed to danger (electric shock, risk of fire), or the device
may be damaged.The safety instructions in chapter"Important
information" on page 27 must be obeyed without fail.
V CAUTION!
The housing cover must be replaced as soon as possible for purposes of
cooling, to comply with EMC regulations (regulations regarding
electromagnetic compatibility) and to prevent fires. The housing cover
must not remain open for longer than 5 minutes.
Figure 36: Opening the housing
Ê Press the two locks in the direction of the arrow (1) and remove the cover (2).
Ê To close it, put the cover on the housing and pull it forwards until the cover
closes and the locking mechanism is engaged.
1
2
1

Table of Contents

Other manuals for Fujitsu PRIMERGY RX300 S5

Related product manuals