Fujitsu PRIMERGY RX300 S5 - Connecting devices to the server

RX300 S5 Operating manual 53
Hardware installation Connecting devices to the server
4.3 Connecting devices to the server
The ports for external devices are on the rear of the server. The additional ports
available on your server depend on the options and expansion cards installed.
The standard ports (figure 12) are marked with symbols, and some are color-
coded:
Figure 12: Connection panel on the rear
I Some of the devices that can be connected may require the installation
and setting up of special software (e.g. drivers) (see the documentation
for the connected device).
Ê Connect the desired devices to the server.
1 Serial port COM 2
(turquoise)
5 Port LAN service
(10/100 Mbit/s)
2 Serial port COM 1
(turquoise)
6 Port LAN 2
(100/1000 Mbit/s)
3 Monitor port - VGA (blue) 7 Port LAN 1 - shared with service
(100/1000 Mbit/s)
4 USB ports
1 2 3 5 6 74