RX300 S5 Operating manual 61
Starting up and operation Controls and indicators
5.1.1.2 Indicators on the control panel
Power-on indicator (two colors)
Lights up green when the server is switched ON.
Lights up orange when the server is switched OFF, but mains
voltage is present (standby mode).
Hard disk activity indicator (green)
Lights up green when an internal drive (HDD or backup drive) is
being accessed.
Global Error indicator (orange)
– Lights up orange if a prefailure event has been detected that
requires (precautionary) service intervention.
– Flashes orange if an error was detected that requires service
intervention.
– Does not light up if there is no critical event.
If the event is still acute after a power failure, the indicator is
activated after the restart.
The indicator also lights up in standby mode.
You can find more details on the indicated errors in the System
Event Log (SEL), on the ServerView Local Service Panel, in the
ServerView Operations Manager or via the iRMC S2's Web
interface.
!
To Next Page
Loading...
