Fujitsu PRIMERGY RX300 S5 User Manual

86 Operating manual RX300 S5
Hot-plug components CSS components
8.1 Hot-plug components
This section describes how to handle hot-plug components and how to modify
your server hardware (e.g. adding/replacing hot-plug power supply units or hot-
plug HDD modules).
The hot-plug procedure increases the availability of system operation and
guarantees a high degree of data integrity and failsafe performance.
8.1.1 Hot-plug power supply units
I A redundant power supply can be created by installing a second hot-
pluggable power supply unit (optional). If one power supply unit fails, the
other unit ensures operation can continue. The defective power supply
unit can be replaced without interrupting operation.
8.1.1.1 Removing dummy module
The slot for the second hot-plug power supply unit contains a dummy module.
This dummy module must be removed before installing a second power supply
unit.
Ê Remove the dummy module from the second power supply unit slot.
V CAUTION!
Keep the dummy module for future use. If the power supply unit is
removed and not replaced with a new unit, the dummy module must be
reinstalled due to cooling, to comply with applicable EMC regulations
(regulations on electromagnetic compatibility) and to protect against fire.
8.1.1.2 Adding a hot-plug power supply unit
Ê Slide the second power supply unit into the empty slot until it locks into place
(see section "Replacing the hot-plug power supply unit") and connect it up
(see "Connecting the server to the mains" on page 55).

Fujitsu PRIMERGY RX300 S5 Specifications

General

Tcase	72 °C
Bus type	QPI
Stepping	D0
FSB Parity	No
Processor code	SLBFD
Processor cache	8 MB
Processor cores	4
Processor model	E5520
System bus rate	5.86 GT/s
Processor series	Intel Xeon 5500 Series
Processor socket	Socket B (LGA 1366)
Processor threads	8
Processor codename	Nehalem EP
Motherboard chipset	Intel® 5520
Processing Die size	263 mm²
Processor frequency	2.26 GHz
Processor cache type	Smart Cache
Processor lithography	45 nm
Processor system type	DP
Processor manufacturer	Intel
Processor package size	42.5 x 45 mm
Processor front side bus	- MHz
Processor boost frequency	2.53 GHz
Processor operating modes	64-bit
ECC supported by processor	Yes
Thermal Design Power (TDP)	80 W
Number of processors installed	1
CPU multiplier (bus/core ratio)	17
Maximum number of SMP processors	2
Physical Address Extension (PAE)	40 bit
Memory types supported by processor	DDR3-SDRAM
Number of Processing Die Transistors	731 M
Memory channels supported by processor	Triple
Memory clock speeds supported by processor	800, 1066 MHz
Memory bandwidth supported by processor (max)	25.6 GB/s
Maximum internal memory supported by processor	144 GB
HDD size	2.5 \
RAID levels	1, 5, 6, 10, 50, 60
HDD capacity	146 GB
HDD interface	Serial Attached SCSI (SAS)
Optical drive type	DVD Super Multi
Total storage capacity	292 GB
Memory slots	18
Internal memory	6 GB
Memory clock speed	1066 MHz
Memory layout (slots x size)	3 x 2 GB
LAN controller	Intel® 82575EB
Supported network protocols	TCP/IP
PS/2 ports quantity	0
USB 2.0 ports quantity	10
Ethernet LAN (RJ-45) ports	3
PCI Express x4 slots	5
Power supply	800 W
Drive bays	1x 5.25\
Dimensions (WxDxH)	482.6 x 770 x 85.9 mm
Storage drive controller	ICH10B
Noise level	45 dB
Compatible operating systems	Windows Server 2003/2008 Linux Enterprise Server Red Hat Enterprise Linux
Chassis type	Rack (2U)
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	10 - 85 %
Certification	GS, CE, CSAc/us, FCC Class A, CB, RoHS, WEEE, VCCI, C-Tick
Processor ARK ID	40200
Intel® Turbo Boost Technology	1.0

Weight and Dimensions

Weight	25000 g