Fujitsu PRIMERGY RX300 S5 User Manual

RX300 S5 Operating manual 73
Starting up and operation Configuring the server
5.3 Configuring the server
This section contains information about configuring the server and installing the
operating system.
5.3.1 Configuring the SAS/SATA RAID controller
The server has a SAS/SATA RAID controller with "Integrated Mirroring
Enhanced" functionality or "MegaRAID functionality". You can configure the
SAS/SATA RAID controller either before or during installation with the
ServerView Installation Manager. Using the ServerView Installation Manager is
recommended.
I The controller makes a separate utility available for IME configuration.
For further information, refer to the "Integrated RAID for SAS User’s
Guide" (on the PRIMERGY ServerView Suite DVD 2 under Industry
Standard Servers - Expansion Cards - Storage Adapters - LSI RAID / SCSI
Controllers).
A separate utility is available to the controller for MegaRAID
configuration. For further information, refer to the "SAS Software User’s
Guide" (on the PRIMERGY ServerView Suite DVD 2 under Industry
Standard Servers - Expansion Cards - Storage Adapters - LSI Configuration
Software).
Further information on modular RAID controllers is provided in the
"Modular RAID Controller Installation Guide" (on the PRIMERGY
ServerView Suite DVD 2 under Industry Standard Servers - Expansion Cards
- Storage Adapters - LSI RAID / SCSI Controllers).
I Descriptions of operating systems not covered in the controller manual
are provided in the corresponding readme files on the driver CDs.

Fujitsu PRIMERGY RX300 S5 Specifications

General

Tcase	72 °C
Bus type	QPI
Stepping	D0
FSB Parity	No
Processor code	SLBFD
Processor cache	8 MB
Processor cores	4
Processor model	E5520
System bus rate	5.86 GT/s
Processor series	Intel Xeon 5500 Series
Processor socket	Socket B (LGA 1366)
Processor threads	8
Processor codename	Nehalem EP
Motherboard chipset	Intel® 5520
Processing Die size	263 mm²
Processor frequency	2.26 GHz
Processor cache type	Smart Cache
Processor lithography	45 nm
Processor system type	DP
Processor manufacturer	Intel
Processor package size	42.5 x 45 mm
Processor front side bus	- MHz
Processor boost frequency	2.53 GHz
Processor operating modes	64-bit
ECC supported by processor	Yes
Thermal Design Power (TDP)	80 W
Number of processors installed	1
CPU multiplier (bus/core ratio)	17
Maximum number of SMP processors	2
Physical Address Extension (PAE)	40 bit
Memory types supported by processor	DDR3-SDRAM
Number of Processing Die Transistors	731 M
Memory channels supported by processor	Triple
Memory clock speeds supported by processor	800, 1066 MHz
Memory bandwidth supported by processor (max)	25.6 GB/s
Maximum internal memory supported by processor	144 GB
HDD size	2.5 \
RAID levels	1, 5, 6, 10, 50, 60
HDD capacity	146 GB
HDD interface	Serial Attached SCSI (SAS)
Optical drive type	DVD Super Multi
Total storage capacity	292 GB
Memory slots	18
Internal memory	6 GB
Memory clock speed	1066 MHz
Memory layout (slots x size)	3 x 2 GB
LAN controller	Intel® 82575EB
Supported network protocols	TCP/IP
PS/2 ports quantity	0
USB 2.0 ports quantity	10
Ethernet LAN (RJ-45) ports	3
PCI Express x4 slots	5
Power supply	800 W
Drive bays	1x 5.25\
Dimensions (WxDxH)	482.6 x 770 x 85.9 mm
Storage drive controller	ICH10B
Noise level	45 dB
Compatible operating systems	Windows Server 2003/2008 Linux Enterprise Server Red Hat Enterprise Linux
Chassis type	Rack (2U)
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	10 - 85 %
Certification	GS, CE, CSAc/us, FCC Class A, CB, RoHS, WEEE, VCCI, C-Tick
Processor ARK ID	40200
Intel® Turbo Boost Technology	1.0

Weight and Dimensions

Weight	25000 g