RX600 S5 Operating Manual 129
CSS components Non-hot-plug components
8.2.3.2 Installing SFP+ transceiver modules
Figure 45: Removing the protective optical port plug
Ê Remove the SFP+ transceiver module from its protective packaging.
Ê Remove the optical port plug from the new / additional SFP+ transceiver
module.
V CAUTION!
– Always keep the protective port plugs attached to the transceiver
optical bores and fiber-optic cable connectors until you are ready
to make a connection.
– Save the protective port plug for future use.
To Next Page
Loading...
