Fujitsu PRIMERGY RX600 S5 - Indicators on the Hot-Plug Power Supply Units

RX600 S5 Operating Manual 73
Starting up and operation Control elements and indicators
5.1.2.4 Indicators on the hot-plug power supply units
Figure 18: Indicators on the power supply units
4LAN
link/transfer
(management
LAN)
Steady green signal when a LAN connection exists.
Remains dark when no LAN connection exists.
Flashes green when LAN transfer takes place.
1 DC power
redundancy
indicator
Lights up green when PSU is running.
Flashes green when PSU is in cold redundancy mode.
2 PSU failure
and warnings
indicator
Lights up amber in case of a critical event (PSU
shutdown).
Flashes amber in case of a warning event (operation
continue).
3AC power
supply input
status
indicator
Lights up green if AC power is present.
Flashes green if AC power is not present.
/
0
1