74 Operating Manual RX600 S5
Control elements and indicators Starting up and operation
© cognitas. Gesellschft für Technik-Dokumentation mbH 2010 Pfad: C:\Programme\FCT\tim_app\tim_local\work\PICHOL\OBJ_DOKU-4888-003.fm
In normal server operation, LED 1 and 3 light up permanently, LED 2 does not
light up. As soon as LED 2 indicates a fault by lighting up, the affected power
supply unit should be replaced as soon as possible. This can be done during
operation (see "Hot-plug power supply units" on page 93).
To Next Page
Loading...
