Fujitsu RAID 0/1 SAS based on LSI MegaRAID User Manual

Modular RAID Controllers 21
Modular RAID 3Gb/s (SAS1.0)
3.2 RAID controller "RAID 5/6 SAS based on
LSI MegaRAID (D2516)"
V ATTENTION!
Make sure you observe the safety notes in chapter "Important
information" on page 9.
The RAID controller "RAID 5/6 SAS based on LSI MegaRAID" is designed to
drive the server's internal disk drives. The RAID stack is based on LSI
MegaRAID
®
and offers powerful data throughput, extensive fault-tolerance and
easy-to-use management.
Figure 4: "RAID 5/6 SAS based on LSI MegaRAID" controller (1078)
3.2.1 Features
● Industry-proven MegaRAID
®
data protection
● Flexibility for both SAS and SATA II
● Advanced management and configuration suites
● Supports RAID levels 0, 1, 5, 6, 10, 50 and 60

Fujitsu RAID 0/1 SAS based on LSI MegaRAID Specifications

General

Brand	Fujitsu
Model	RAID 0/1 SAS based on LSI MegaRAID
Category	Controller
Language	English