EasyManua.ls Logo

Fujitsu RAID 0/1 SAS based on LSI MegaRAID - RAID Ctrl SAS 6 G 5;6 512 MB (D2616) Controller

Fujitsu RAID 0/1 SAS based on LSI MegaRAID
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Modular RAID Controllers
37
Modular RAID 6Gb/s (SAS2.0)
4.2 RAID Controller "RAID Ctrl SAS 6G 5/6
512 MB (D2616)"
V ATTENTION!
Make sure you observe the safety notes in chapter "Important
information" on page 9.
The RAID controller "RAID 5/6 SAS based on LSI MegaRAID" is designed to
drive the server's internal disk drives. The RAID stack is based on LSI
MegaRAID
®
and offers powerful data throughput, extensive fault-tolerance and
easy-to-use management.
Figure 11: "RAID Ctrl SAS 6G 5/6 512 MB (D2616)" controller (based on LSI SAS2108)

Table of Contents

Related product manuals