EasyManua.ls Logo

Fujitsu RAID 0/1 SAS based on LSI MegaRAID - PY SAS RAID HDD Module w;o Cache (D2837) Controller

Fujitsu RAID 0/1 SAS based on LSI MegaRAID
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
70
Modular RAID Controllers
Modular RAID 6Gb/s (SAS2.0)
4.6 SAS Controller "PY SAS RAID HDD Module
w/o Cache (D2837)"
V ATTENTION!
Make sure you observe the safety notes in chapter "Important
information" on page 9.
The RAID controller "PY SAS RAID HDD Module w/o Cache (D2837)" is
designed to drive the BX400 and BX900 server's internal disk drives. The RAID
stack is based on LSI MegaRAID
®
and offers powerful data throughput,
extensive fault-tolerance and easy-to-use management.
Figure 22: "PY SAS RAID HDD Module w/o Cache (D2837)" (based on LSI SAS2208)

Table of Contents

Related product manuals