4.3 The Explorer Window
Operations
Appliance
Administrator
User Administrator User
Configure global
settings
Yes No No
Reboot Yes No No
Flash upgrade Yes No No
Administer User
Accounts
Yes Yes No
Monitor server status Yes Yes No
Preemptions listed in the previous table onlyapply to remote clients. They do not apply
to users accessing the server locally.
Users can become locked out by the Security Lock-out feature if they try to enter
an invalid password five consecutive times. You can configure Security Lock-out
settings as well as unlock any user through the User category.
Modifying users
To add or modify a user:
1. Click the Configure tab in the OBWI, then click the Users category in the left
column.
2. Click the Add User button on the right side of the window to add a new user.
-or-
Click a username listed in the Users column to modify an existing user. The
Add/Modify User window appears.
3. Type the username and password you wish to assign to the user and then
verify the password by typing it in the Verify Password field. The password
must be 5-16 characters and contain alphabetical characters of mixed case
and at least one number.
4. Select the appropriate access level for this user from the drop-down list. If
you select the User option, the Set User Access Rights button becomes
active.
590-1035-640A
27
To Next Page
Loading...
