What to do if my Fujitsu Scanner won't turn on?
If your Fujitsu Scanner won't turn on, try these steps: * Ensure the AC/USB cable and AC adapter are correctly connected. * Disconnect and reconnect the AC adapter/cable, waiting at least 5 seconds before reconnecting. * Open the Paper chute. * Wait until Mac OS has completely started up. * Press the [POWER] button on the scanner.
What to do if scanning does not start on my Fujitsu Scanner?
If scanning doesn't start on your Fujitsu Scanner, try the following: * Ensure the USB cable is correctly connected (and if using a hub, ensure it's powered). * Disconnect and reconnect the AC adapter/cable, waiting at least 5 seconds before reconnecting the power cable. * If the ScanSnap Manager icon isn't displayed, start ScanSnap Manager from the 'ScanSnap' folder within 'Applications'. * If problems persist: 1. Disconnect and reconnect the AC cable and adapter. 2. If using a USB hub, connect the scanner directly to your computer. 3. Restart your computer. 4. If all else fails, uninstall and reinstall ScanSnap Manager. * If resuming from hibernation, move the mouse or press a key before scanning.
Why files created by using the ScanSnap cannot be opened Fujitsu Scanner?
If files created using ScanSnap cannot be opened with a specified application, verify the location of the image saving folder and delete any corrupted files. After that, retry scanning.
How to unhide "ScanSnap Quick Menu" Fujitsu ScanSnap S510M Scanner?
To unhide the "ScanSnap Quick Menu", click "Use Quick Menu" to check it.
Why paper jam occurs frequently Fujitsu ScanSnap S510M?
To mitigate frequent paper jams when scanning with the Carrier Sheet on your Fujitsu Scanner, feed about 50 sheets of PPC paper or recycled paper, and then scan the document using the Carrier Sheet. You can use either unused or used PPC/recycled paper.
Why message "Document size incorrect" appears Fujitsu ScanSnap S510M Scanner?
If you receive a "Document size incorrect" message when scanning with a Carrier Sheet on your Fujitsu Scanner, it's likely that you've placed multiple small-size materials (pictures/post cards) in the Carrier Sheet for scanning. Ensure that you put only one small-size document (photo/post card) into the Carrier Sheet per scan.
How to fix Fujitsu ScanSnap S510M that cannot be turned on?
To resolve the issue of your Fujitsu Scanner not turning on, ensure the AC/USB cable and AC adapter are correctly connected. If the problem persists, try disconnecting and then reconnecting the AC cable and AC adapter. Make sure the paper chute is open. Also, if you're using Mac OS X, wait until it has completely started up, as the LED will remain off during startup or sleep mode. Finally, ensure you press the [POWER] button for more than 1 second.
What to do if document is not fed properly or gets jammed Fujitsu ScanSnap S510M Scanner?
If the document is not feeding properly or is jamming in your Fujitsu Scanner, check if the inside of the scanner is dirty. Also, consider whether you are scanning thin, torn, or folded paper. Clean any dirty locations inside the scanner. If you are scanning problematic paper types, use a Carrier Sheet for each page.
Why letters on the scanned images cannot be read Fujitsu Scanner?
If letters on the scanned images from your Fujitsu Scanner are unreadable, especially if they appear squashed, and you have scanned documents written in small letters, select "Best" or "Excellent" in the Image quality drop-down list on the [Scanning] tab of the "Scan and Save Settings" window, and then re-scan the document.
Why scanned images are skewed Fujitsu Scanner?
If scanned images are skewed even when "Correct skewed character strings automatically" is enabled on your Fujitsu Scanner, it may be because the document is skewed excessively while being fed into the ADF. This function can only correct skews of less than +/-5 degrees. Use the side guide to load the document so that the skew does not exceed this limit.
To Next Page
General