19
- Tablet Features
Turning the Tablet On and Off
Touchscreen
High-quality TFT displays are installed in Fujitsu Android Tablets. TFT monitors are manufactured for a specific
resolution. An optimal, clear picture can only be ensured with the correct resolution intended for the relevant
TFT monitor. A monitor resolution that differs from the specification can result in an unclear picture.
The screen resolution of your Android Tablet’s touchscreen is optimally set at the factory.
Background lighting
TFT monitors are operated with background lighting. The luminosity of the background lighting can decrease
while the tablet is in use; however, you can set the brightness of your monitor individually.
Selecting display orientation
You can choose to use either portrait (vertical) or landscape (horizontal) orientation for the display.
The alignment of the screen adapts automatically to the alignment in which you are using the tablet. If you hold
the tablet in portrait orientation, the image will be shown in portrait format. If you hold the tablet in landscape
orientation, the image will be shown in landscape format.
If you want to disable automatic matching of the alignment, proceed as follows:
To turn the tablet on: Press the On/Off switch (Figure 7) for
two seconds. The tablet may vibrate slightly while it is
starting up.
To turn the tablet off: Press the On/Off switch until a
message appears asking if you want to turn off the tablet.
Confirm that you do. The tablet may vibrate slightly while it
is shutting down.
Figure 7. Powering the system on and off
To Next Page
Loading...
Need help?
General