Fujitsu UTY-RNRUZ5 - Monitor Functionality; Monitor Mode Screen Overview

1 MONITOR
1-1 Monitor
1-1-1 Monitor mode screen
Monitor Mode Screen is home screen of this unit.
76°F
76°F
80°F
80°F
74°F
74°F
84°F
68°F
Away
Custom
Auto
Auto
Cool
Heat
Office
Set Temp.
Mode
MenuStatus
Vacation
Fan
Fri 10:00AM
Room Temp.
Cool
Heat
Override
Occupied
(m)
(m)
(c)
(f)
(e)
(i)
(h)
(g)
(d)(m)(a) (m)
(m) (j)(k)(l)
(b)
(a) R.C.groupname:
Name of the remote controller group to which this unit is
connected.Referto[3SETTING]→[3-8InitialSetting]
→[3-8-4R.C.GroupNameSetting].
(b) Clock:
Referto[3SETTING]→[3-8InitialSetting]→[3-8-2
Date Setting].
(c) Mode:
When this is touched, the display switches to the “Mode”
screen.Referto[2CONTROL]→[2-2OperationSet-
tings]→[2-2-1SettheOperationMode].
(d) Settemp.:
When this is touched, the display switches to the tem-
peraturesettingscreen.Referto[2CONTROL]→[2-2
OperationSettings]→[2-2-2SettheTemperature].
(e) Fan:
When this is touched, the display switches the fan speed
settingscreen.Referto[2CONTROL]→[2-2Operation
Settings]→[2-2-3SettheFanSpeed].
(f) Away:
When “Away” is enabled, the start temperature of “Away”
operation is displayed when unoccupied. When “away”
is operating, “Away Operation” is displayed.
Referto[3SETTING]→[3-5SpecialSetting]→[3-5-5
Away Setting].
(g) RoomTemp.:
This unit ambient temperature sensed by this unit is
displayed.Referto[3SETTING]→[3-8InitialSetting]
→[3-8-7DisplayItemSetting].
(h) Override:
Displayedwhilethefollowingfunctionsareoperating:
• AutoO󰀨Timer:
Referto[3SETTING]→[3-3AutoO󰀨TimerSetting].
• SetTemp.AutoReturn:
Referto[3SETTING]→[3-5SpecialSetting]→[3-5-2
Set Temp. Auto Return].
(i) Occupiedstate:
“Occupied” or “Unoccupied” is displayed according to
the operation of Operation button or schedule setting.
(j) Menu:
When this is touched, the display switches to the “Menu”
screen. Refer to [3 SETTING].
(k) Status:
When this is touched, the display switches to the “Status”
screen. Refer to [1-1-2 Status Display].
(l) Vacation:
When this is touched, the schedule is disabled and the
indoor unit remains unoccupied. Refer to [1-1-3 Vaca-
tion]. “Vacation” is displayed only when a schedule is
set.
(m) Statusicons:
Indoor Unit Stop is enabled. Refer to [1-1-5 Indoor
Unit Stop].
Theerroroccurred.Referto[5OTHERS]→[5-3
Error Code].
Operation from this unit is prohibited by the Central
Controller. Refer to [1-1-2 Status Display].
Mode mismatch. The mode which cannot operate
simultaneously is selected. Refer to [1-1-2 Status
Display].
“Custom Auto Mode” or “Away” does not work.
Verifythefollowingsettings:
• R.C. Sensor Setting
Referto[3SETTING]→[3-8InitialSetting]→
[3-8-5 R.C. Sensor Setting].
• Master Indoor Unit Setting (For installer)
Consult authorized service personnel.
When the remote controller that uses a sensor is
changed in the master indoor unit or R.C. Group,
change the operation mode or disable “Away”.
TheAutoO󰀨Timerisset.Referto[3SETTING]→
[3-3AutoO󰀨TimerSetting].
Theweeklytimerisset.Referto[3SETTING]→
[3-4 Weekly Timer Setting].
The set temperature automatic return setting is set.
Referto[3SETTING]→[3-5SpecialSetting]→
[3-5-2 Set Temp. Auto Return].
Itshowsthatitistimetocleanthelter.Referto
[3SETTING]→[3-9Maintenance]→[3-9-3Filter
Sign Reset].
The temperature sensor of this unit is used. Refer
to[3SETTING]→[3-8InitialSetting]→[3-8-5R.C.
Sensor Setting].
For the screen display, this product uses a Bitmap font
made and developed by Ricoh Company, Ltd.
During the Lead lag operation, the monitor mode display dif-
fers as below.
Referto[3SETTING]→[3-8InitialSetting]→[3-8-10Lead
Lag Setting] for details of the Lead lag operation.
(a) R.C.groupname:
“Lead Lag” is shown.
(c) Mode:
You cannot change the operation mode during the Lead
lag operation. The screen does not move even if you
touch here.
(j) Menu:
When touching, the display switches to the “Lead Lag
Setting” screen.
(k) Status:
It does not appear.
(m) Statusicons:
lights if an error has occurred.
blinks during the Lag operation.
En-5