Fujitsu UTY-RNRUZ5 - Status Display and Special States

1-1-2 Statusdisplay
The remote controller and indoor unit setting status are dis-
played.
Touch the [Status] on monitor
mode screen. “Status” screen is
displayed.
76°F
76°F
80°F
80°F
74°F
74°F
84°F
68°F
Custom
Auto
Auto
Cool
Heat
Set Temp.
Mode
MenuStatus
Vacation
Fan
Fri 10:00AM
Room Temp.
Cool
Heat
Away
Occupied
The “Status” screen has 2, 3 or 4 pages which are switched
by touching the [Next Page] or [Previous Page]. When the
[Monitor] is touched, the display returns to the monitor mode
screen.
(*:Itemsthatindoorunitdoesnotsupportarenotdisplayed.)
< Page 1 >
Status
Air Flow Direction
VT
Off
13
Off
HZ
Economy
Individual
Anti Freeze
Page 1/ 4
Monitor
Next
Page
• AirFlowDirection*:
Theairowdirectionsettingisdisplayed.Thesettingwill
appearonlyforindoorunitswhichcansetairowdirec-
tions.
“Individual” is displayed only when this remote control-
ler is connected to the indoor unit which supports the
appropriate function. When setting is performed, [
✓
] is
displayed. Refer to [3 SETTING]→[3-2AirFlowDirection
Setting]→[3-2-3IndividualVTHold].
• Economy:
ON or OFF of the economy setting is displayed.
• AntiFreeze*:
ON or OFF of the anti freeze setting is displayed.
< Page 2 >
• Under Maintenance
• Forced Stop
• Mode Mismatch
Previous
Page
Status
R.C. Prohibition
Special State
Page 2/ 4
Monitor
Next
Page
• R.C.Prohibition:
The functions whose operation from this unit and Wireless
type remote controller is prohibited by the Central Control-
ler are displayed by icons. The contents of each icon are
asfollows:
:Alloperations :OnandO󰀨
:On :Modesetting
:Temperaturesetting :Timersetting
:Filtersignreset
When you try to operate or set the
prohibited function, the following
screen is displayed and operation
or setting is not possible. When
the [Close] is touched, the display
returns to the screen before opera-
tion was performed.
Setting is prohibited.
Close
< Page 2 (to 3 or 4) >
• Op. Controlled
• Set Temp. Limited
• Energy Saving Operation
• Emergency Heat
• Defrost
Status
Special State
Page 3/ 4
Monitor
Previous
Page
Next
Page
• Oil Recovery
• Human Sensor Setting
• Fan Control for Energy Saving
Status
Special State
Page 4/ 4
Monitor
Previous
Page
• Special State (Page 2, 3 or 4)
The indoor unit status is displayed. When the contents to
be displayed exceeds 3, they are displayed on the next
page(Page3or4).Thestatuscontentsareasfollows:
(Only items that indoor unit supports or operating items
are displayed.)
UnderMaintenance:
Indoor unit is inspected. Indoor unit operation is stopped
during this time.
ForcedStop:
Indoor unit is stopped forcibly by external input.
ModeMismatch:
A mode which cannot be operated simultaneously with a
master indoor unit or other operating indoor unit is set in
the same RB group of a heat recovery system or in the
same refrigerant system of a heat pump system. In this
case, since the mode is switched to the fan mode, reset
to a mode that can be operated simultaneously. Refer to
[4OPERATIONTIPS]→[4.1SelectableModes]forthe
modes which can be operated simultaneously.
OperationControlled:
This content is displayed at the Slave indoor unit when
Master indoor unit is set in the refrigerant system or RB
Group to which this unit is connected. When a Master
indoor unit is not set, this shows that there is already
another indoor unit operating. Only a mode set by Master
indoor unit or a mode that can be operated simultaneously
with another operating indoor unit can be selected. Refer
to [4.OPERATION TIPS] for the modes which can be oper-
ated simultaneously.
SetTemp.Limited:
Indoor unit temperature setting is limited by the Central
controller.
EnergySavingOperation:
The energy saving is set by the Energy Manager for Sys-
tem Controller.
EmergencyHeat*:
The indoor unit is running on the Emergency Heat mode.
Refer to [3 SETTING]→[3-5SpecialSetting]→[3-5-8
Emergency Heat].
Defrost:
At heating operation, the outdoor unit performs Defrost
operation. The indoor unit fan is stopped during this time.
OilRecovery:
The outdoor unit performs oil recovery operation. The
indoor unit fan may be stopped during this time.
HumanSensorSetting:
This function is enabled. Refer to [3 SETTING]→[3-5Spe-
cialSetting]→[3-5-6HumanSensorSetting].
FanControlforEnergySaving:
This function is enabled. Refer to [3 SETTING]→[3-5Spe-
cialSetting]→[3-5-7FanControlforEnergySaving].
En-6