2-21
Chapter 2 Installation
Settings for External Printer Output
Network printers that can print without a computer (laser printers) can be connected as external printers.
The entire process for printing via an external printer takes around 1-2 minutes per page. It may take a long time to
complete a print job if a large volume of printing is requested at once. (The time required depends on the usage
environment.)
When Using a Network Printer
1 Install the network printer.
Refer to "Connecting to the Network" (P2-16) .
2 Check the IP address of the network
printer.
Refer to the operation manual of the printer.
3
In the Settings, select [Communication] -
[Printer] - [Network Printer] and set the
IP address of the network printer in the
"IP address" field.
4 Select [Communication] - [Printer] -
[Network Printer] in the Settings and set
[Yes].
5 Select [Equipment Control] - [Print] -
[Output Target] in the Settings and set
[Network Printer].
To Next Page
Loading...
