© The Fulton Companies 2012
MAINTENANCE CAL-IOM-2012-1220 SECTION 4
4-6
! WARNING
All information in this manual is for
reference and guidance purposes,
and does not substitute for required
professional training, conduct,
and strict adherence to applicable
jurisdictional/professional codes and
regulations.
If any manual reset limit device trips,
do not reset without determining and
correcting the cause. These include
ame safeguard, high or low gas
pressure, and high temperature limit.
4 CAUTION
All maintenance procedures should
be completed by trained personnel.
Appropriate training and instructions
are available from the Fulton Service
Department at (315) 298-5121 or your
local Fulton Representative.
After All Repairs and Maintenance
1. Follow “Pre-Start Check List” provided with the unit, and all Safety Checks.
2. Fire the Boiler and perform combustion check. Analyze combustion
throughout the range and verify proper operation of safety devices.
3. Make any necessary adjustments.
Troubleshooting
Use the following tables as a guide to troubleshooting your boiler.
To Next Page
Loading...
