EVO EXPERT Manual 52/105
purposes (the upper one). This connection is shown in the following picture using a USB memory as
storage device:
Use the ‘’ and ‘’ keys to highlight the ‘PRINTER/USB PEN’ option and press ‘ENTER’ to start the
download. If there is no USB memory or POS printer connected to the viscometer the viscometer
will not change its screen, waiting for the connection to a USB memory or to a printer. If the
viscometer detects the USB stick or the printer connected to the suitable USB connector the
download will start, showing this text on the screen:
Once completed the download, the viscometer will return to the main menu.
The following picture shows an example of piece of paper given by the POS printer. It shows first
information about the viscometer model and the test conditions, such as the spindle, type of
analysis, units and sample density. Then it offers the main values recorded by the viscometer,
mainly the viscosity and temperature values at the times listed. Finally, it is also given the number
of measurements of the test.
To Next Page
Loading...
Need help?
General
