TRT800 / P/N 800ATC-(200)-(200)
Operation and Installation
18 Document-No: 03.2102.010.71e / Revision: 2.02
3.6.1.3 Background Illumination
• To switch off illumination connect „LIGHT“ to „GND“ or leave it
unconnected.
• Illumination can be varied using an input voltage (dimmer or
switch) from 0 V .. +UB connected to „LIGHT“.
(0V for off, +UB for full brightness, inbetween linear)
3.6.2 Static Air Port
Install a silicon soft tube fitting the 5 mm static air port at the backside of
the transponder and secure plumbing with appropriate clamps.
To Next Page
Loading...