Funkwerk TRT800 - 3.10 Starting Up; 3.11 Accessories

TRT800 / P/N 800ATC-(200)-(200)
Operation and Installation
23Document-No: 03.2102.010.71e / Revision: 2.02
3.10 Starting Up
Turn the transponder on with .
After startup the following screens appear:
3.11 Accessories
Part Number Description
TRT800EMSS External memory (AC-Address-Adapter) for
RS232 including wiring,
9-pol. SUB-D-Jack and Connector
TRKABEL2 Antenna cable 2,5 m (8.2 ft)
TNC Æ BNC, RG-142, 1,075 dB
TRKABEL3 Antenna cable 4,0 m (13.2 ft)
TNC Æ BNC, RG-142, 1,72dB
TRKABEL4 Antenna cable 6,5 m (21.3 ft)
TNC Æ BNC, RG-142, 2,8 dB
CI-105 Transponder/DME Antenna TSO C66b,C74c
CI105 Comant Industries Inc.
Height: 3,25”, Weight: 90 g (0.2 lbs)
AV22 Bar antenna
The TRT800 starts in Standby Mode (indicated with STBY).
In order to change into operational mode (indicated with
ACS) press
.
Very important is the correct configuration of the 24bit
Aircraft-Address (see 4.2.1 Setup Steps).