5. CUSTOMIZING YOUR UNIT
5-20
5.7.2 GPS receiver setup
The GPS SETUP menu sets up the GPS Receiver GPS-310B/320B. Press the
[MENU] key followed by the SYSTEM CONFIGURATION, NAV OPTION and
GPS SENSOR SETTINGS soft keys to display this menu.
GPS
SETUP
EDIT
LOCAL TIME OFFSET
+00:00
GEODETIC DATUM
WGS-84
POSITION SMOOTHING
000 second(s)
SPD/CSE SMOOTHING
005 second(s)
GPS SPEED AVERAGING
060 second(s)
LATITUDE OFFSET
0.000’N
LONGITUDE OFFSET
0.000’E
DISABLE SATELLITE
_ _ _ _ _ _
LATITUDE
45°35.000’ N
LONGITUDE
125°00.000’ W
ANTENNA HEIGHT
005 m
GPS FIX MODE
2D/3D
COLD START
NO
RETURN
GPS
STATUS
WAAS
SETUP
Appears only when
GPS-320B is connected.
GPS setup menu
Contents of GPS setup menu
Item Description Settings Default Setting
Local Time
Offset
GPS uses UTC time. If you would
rather use local time, enter the time
difference between it and UTC. Use
the +< - ->- soft key to switch from
plus to minus and vice versa.
-13:30 to +13:30
hours
00:00
Geodetic
Datum
Geodetic datum is a reference for
geodetic survey measurements
consisting of fixed latitude, longitude
and azimuth values associated with a
defined station of reference. You
must have the correct geodetic
datum selected in your plotter so that
it will reference the correct point on
the chart for a given latitude and
longitude. Although WGS-84 is now
the world standard, other categories
of charts still exist. Refer to Appendix
for a full list of geodetic datum.
See Appendix for
full list.
WGS-84
(Con’t on next page)
To Next Page
Loading...
Need help?
General
