1. MOUNTING
1-14
1.3 Transceiver Unit
When selecting a mounting location for the transceiver unit, keep the following points in
mind.
• Since the transceiver unit generates heat, install it on a dry, well ventilated location.
• The unit weights 20 kg. For that reason reinforce the mounting area if necessary,
especially for mounting on a bulkhead.
• Secure the maintenance space shown in drawing at the back of this manual for ease of
maintenance and service.
• The maximum cable length between transceiver unit and pre-amplifier unit is 5, 10 or 15
m.
#50
#50
281
288
#300
#500
240 + 1
505 + 1
# = Meintenance space
All dimension in millimeters
Transceiver unit, mounting dimensions
To Next Page
Loading...
