1-1
1. MOUNTING
Be sure the power supply matches equipment voltage
rating.
Improper power supply will damage the equipment.
Locate the transducer where the affects of noise and air
bubbles are minimal.
Noise and air bubbles will affect performance.
When selecting a mounting location keep the following
points in mind:
Keep equipment out of direct sunlight.
Keep equipment away from air conditioner.
The useable temperature range of the display unit is 0 - 50 C.
Provide sufficient ventilation.
Select location where vibration is minimal.
Locate the equipment away from magnets or equipment generating
magnetic fields.
Keep the transducer cable away from oil.
Oil can corrode the cable.
Do not expose the transducer to hot water.
Hot water can damage the transducer.
NOTICE
Do not turn on the equipment with the transducer exposed
to air.
Exposing the transducer to air may damage it.
To Next Page
Loading...
