Furuno CSH-5L - Page 8

vi
Name Type Code No. Qty Remarks
S10-6-15 (38P) 006-976-580 15 m
S10-6-30 (38P) 006-976-590 30 m
Processor cable
S10-6-50 (38P) 006-976-600
1
50 m
Processor/
Transceiver units
S10-7-5 006-976-610 5 m
S10-7-10 006-976-460 10 m
TX cable
S10-7-15 006-976-470
1
15 m
Transceiver/
Pre-amplifier units
10S1562 006-976-620 5 m
10S1583 006-976-440 10 m
RX cable
10S1584 006-976-450
1
15 m
Transceiver/
Pre-amplifier units
3COX-2P-6C 5M 000-146-500 5 m
Display unit cable
3COM-2P-6C 10M 000-146-501
1
10 m
Display/
Processor units
Hull unit can be arranged as below.
CSH - 5130 – 5L - (1) - (2)
(1): Input voltage: 60 (100VAC), 72 (220VAC)
(2): Frequency: 55 kHz, 68 kHz
Hull unit can be arranged as below.
CSH- (1) - (2) - (3) - (4)
(1): Stroke: 5040 (600 stroke) or 5041 (400 stroke)
(2): Frequency: 55 kHz or 68 kHz
(3): Tank: N (None), S (Steel), F (FRP)
(4): Shaft length:13 (1300 mm), 15 (1550 mm), 23 (2350 mm), 40 (4065 mm),
94 (945 mm)
Ex) Stroke: 600 mm; Frequency; 55 kHz; Steel tank, Shaft length, 2350 mm,
type is CSH-5040-55-S-23.
Optional Supply
Name Type Code No. Qty Remarks
DC-AC Inverter TR-2451 - 1 set
E/S Interface VI-1100A - 1 set
Retraction Tank OP10-5 - 1 set Made of aluminum
Speaker SEM-21Q - 1 set
Motion Sensor MS-100 - 1 set
Remote Controller CSH-7040 - 1 set