1. MOUNTING
1-18
1.6 Ground
All units (excluding the control unit) should be grounded to ship’s hull, with copper strap or
earth wire depending on the unit.
Note: If the ground is not properly, operation error or bad video may occur.
CAUTION
Attach protection earth (ground)
securely to the ship's body.
The protection earth (ground) is
required for the transceiver unit and
DC-AC inverter (option) to prevent
electrical shock.
Protection earth
Ground
Ground
Protection earth
Processor unit
Transceiver unit
Pre-amplifier unit
DC-AC inverter
Locations of earth
To Next Page
Loading...
