Furuno CSH-5L - Synchronizing Transmission with Other Equipment

2. WIRING
2-16
CIF output sentence
Data No. Information
5: Target position (L/L)
Gyrocompass
Heading data from a gyrocompass can be input via A-D converter AD-100. For details, see
the operator’s manual for AD-100.
Echo sounder
Echo sounder video can be input using the echo sounder interface VI-1100A. For details,
see the installation manual for VI-1100A.
Speed log
Log pulse (contact signal) can be input.
2.5 Synchronizing Transmission with Other
Equipment
2.5.1 Synchronizing transmission with another CSH-5L
When two CSH-5Ls are installed, connect them as shown below, so that the transmission of
the second sonar is synchronized with that of the first.
Wiring
MAIN Board
10P6950
MAIN Board
10P6950
5
6
1
2
Processor unit
Processor unit
J11
J11
1st sonar
2nd sonar
INT KP-H
INT KP-C
EXT KP-H
EXT KP-C
NH8P
(Local
supply)
Twisted pair
cable
(Local supply)
NH8P
(Local
supply)
Connecting two CSH-5Ls