2. WIRING
2-8
2.3 Transceiver Unit
All cables, except for the power cable, connected to the transceiver unit are fitted with
connectors and lugs.
Connector and terminal board location in transceiver unit
2.3.1 Connecting TX cable
The connector numbers are marked on respective 2P plugs (12 pcs.) of the TX cable.
Connect them to the transceiver unit, referring to the sticker on the PCB fixing plate. The
ground wire should be connected to the chassis as shown below.
Connector No.
PCB fixing plate
Ground wire
TX cable Transceiver unit
To Next Page
Loading...
