Furuno CSH-5L - Suppressing Bottom Tail

2. WIRING
2-2
Hull unit
Pre-amplifier unit
Transceiver unit
CN-C3 CN-C2
Transducer cable
Hull unit cable
TX cable 18.3 S10-7-5 (5 m) S10-7-10 (10 m) S10-7-15 (15 m) RX cable 28.4 10S1562 (5 m) 10S1583 (10 m) 10S1584 (15 m)
CN-B2
Processor cable φ18.3 S10-6-15 (15 m) S10-6-30 (30 m) S10-6-50 (50 m)
Ship's mains 100/115/200/220/240 VAC 1 , 50-60Hz
Processor unit
Control unit
CN-A1
REMOTE
S06-6-10 (5-5P),10 m
Motion sensor MS-100
CN-B3
5m/10m
Display unit (User supplied)
Display cable 3COX-2P-6C 5M, 5m 3COX-2P-6C 10M, 10m
*1
DC-AC inverter TR-2451
Ship's mains
24VDC
DPYCY-4 (Shipyard arrangement, 50 m)
DPYCY-6 (Shipyard arrangement, 5 m)
*1
*2
*1: Fabricate cables locally. *2: For other connection of external equipment to the processor unit, see page 2-14.