Furuno DSC-6 - System Settings (F6)

DP-6
D2-4
FS-1500 serise:OFF
3.2 System settings (F6)
Press function key [F6] to display the System display.
To change settings, first, select “change” on the top (Setup) line. Press the [↓] key to
select item, then press the [→] or [←] key to select option.
“Default” on the setup line is for factory use.
“Section 4.2” describes how to change System menu.
Enter setting referring to below.
MIF Tune OFF
Freeze OFF
AGC OFF: FS-1562 ON or OFF: FS-5000
Emission ON
Tx/Rx MSG Save ON or OFF
Edit before sending ON or OFF
Don’t change !!
*Password is needed fo
r
change of these setting.
Pass word: DP6
(Caps Lock)