REMOTE
I1-3
1.1 Remote port specifications
Equipment Port
Specification
(Default)
Option Note
FS-75/2550 Remote RS-232C C.Loop
Select to the REMOTE-A or B
board.
-RS-232C:REMOTE A(05P0457)
-C.Loop:REMOTE B(05P0458)
FS-1562 Remote RS-232C C.Loop
Select to the REMOTE-A or B
board.
-RS-232C:REMOTE A(05P0457)
-C.Loop:REMOTE B(05P0458)
REM-1 RS-232C None
RS-232C Connect to TB3
REM-2
RS-232C C.Loop
Connect to TB4
Select to Jumper setting in AF
board (AF Board suffix number-
33 and after)
REM-3 RS-232C None
FS-5000/8000
CIF/NMEA CIF(C.Loop) None
Select to Jumper setting in AF
board and System setting
(9933:MIF/TBUS/CIF/NMEA)
RV-117G REMOTE RS-232C None
RV-118G RS-232C No RS-232C Install to I/F Board:05P0261
RV-128G RS-232C RS-232C None
XMIT RS-232C None FT-253/803
(Controllr:CU-
5521)
RCVER RS-232C None
CIF/NMEA NMEA CIF
Select to Jumper setting on CONT
board and System setting
(COMM)
DMC(REM-A) C.Loop None
VHF(REM-B) C.Loop None
NBDP(REM-C) RS-232C None
MF/HF
RT(REM-D)
RS-232C None
MF/HF
RX(REM-E)
RS-232C None
DSC-5/5A/5R
PRINTER Centronics None
Complies with Centronics
interface
PP-500 Printer Centronics None
Complies with Centronics
interface
PP-510 Printer Centronics None
Complies with Centronics
interface
PP-505 IN/OUT (J2) RS-232C C.Loop C.Loop: Install to OP16-14.
To Next Page
Loading...
