Furuno DSC-6 - Page 397

REMOTE
I1-6
Equipment Port
Specification
(Default)
Option Note
DTE 1 RS-232C None
DTE 2 RS-232C None
DMC RS-410N None
RP RS-410N None
FELCOM 10
(IC-200)
NMEA/CIF NMEA CIF
Select to Jumper setting on CONT
board.
REMOTE A RS-232C None Connected IC-200.
PRINTER RS-232C None
Complies with Centronics
interface
REMOTE B RS-232C None
CONTROL RS-232C None
PRINTER RS-232C None
FELCOM 10
(IC-500)
CIF/NMEA NMEA CIF
Not used
DTE 1 RS-232C None
DTE 2 RS-232C None
DATA RS-232C None
DMC RS-410N None
BUZZER RS-410N None
FELCOM 11
(IC-211)
NMEA NMEA None
REMOTE A RS-232C None Connected IC-211.
PRINTER RS-232C None
Complies with Centronics
interface
REMOTE B RS-232C None
CONTROL RS-232C None
FELCOM 11
(IC-511)
CIF/NMEA NMEA CIF
Not used
COM 1 RS-232C None Connected IC-211.
COM 2 RS-232C None Not used
FELCOM 11
(IB-581)
PRINTER RS-232C None
Complies with Centronics
interface
DTE 1 RS-232C None
DTE 2 RS-232C None
DATA RS-232C None
DMC 1 RS-410N None
DMC 2 RS-410N None
FELCOM 12
(IC-212)
BUZZER RS-410N None
COM 1 RS-232C None Connected IC-212.
COM 2 RS-232C None Not used
FELCOM 12
(IB-581)
PRINTER RS-232C None
Complies with Centronics
interface
Printer RS-232C None
Complies with Centronics
interface
232C RS-232C None
ALARM RS-410N None
EGC-5
CIF/NMEA NMEA CIF Select to system setting.