EasyManua.ls Logo

Furuno DSC-6 - Page 405

Furuno DSC-6
493 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
REMOTE
I1-14
2. Connection to FS-1562, FS-1552, FS-1502 and FS-1503
For the FS-1562;
The REMOTE-A (RS-232C) board on the TX/RX board is replaced with the
REMOTE-B(C.Loop) board (05P0458: 005-517-500).
REMOTE A (RS-232C) board: 05P0457 005517480
REMOTE B (C.Loop) board : 05P0458 005517500
For the FS-1552 and FS-1502;
Install the optional board: REMOTE-B (C.Loop).
The REMOTE-B kit, consists of the REMOTE-B board and the connector assembly.
REMOTE A (RS-232C) Kit : OP05-39 005920310
REMOTE B (C.Loop) Kit : OP05-40 005920320
For the FS-1503;
Install the optional board: REMOTE-B (C.Loop).
The REMOTE-B kit, consists of the REMOTE-B board and the connector assembly.
REMOTE A (RS-232C) Kit : OP05-82 005939810
REMOTE B (C.Loop) Kit : OP05-83 005939820
Note)
If more than two RB-500s are installed, connect them via the Distributor DB-500.

Table of Contents

Other manuals for Furuno DSC-6

Related product manuals