Furuno FELCOM 500

   
3.1 Web MMI

3-8
Navigation
Bar Menu
Menu Contents area Items-1 Items-2 Note
ICCID xxxxxxxxx The number of the SIM card
. Enable
PIN Enable/Disable
. Disable
PIN code . (Xretries left) Current PIN . (X retries left) New PIN
.
SIM
Confirm new PIN .
Set up and change the PIN code for the SIM card.
Note) If the user fails to enter the correct PIN
code for 3 consecutive times, the user will be required to enter PUK, and the PIN code is saved in the SIM card.
Basic/GPS (NMEA port)
Baud rate 4800 bps/38.4 kbps
The setting for Settings -> Basic settings -> GPS will be displayed.
Port 1 Port 2 Port 3
Basic/ Analog ports
Port 4
Telephone, FAX, Telephone and fax, No Connection
The setting for Settings -> Basic settings -> Analog ports will be displayed.
Ringing pattern Different/Same
Basic/ Incoming indicator
Enabled service
Voice, FAX, ISDN UDI, ISDN RDI
The setting for Settings -> Basic settings -> Incoming indicator will be displayed.
Baud rate
9600, 19200, 38400, 57600, 115200
Parity None, Even, Odd
Basic/ Serial port
Flow control Hardware, Software, None
The setting for Settings -> Basic settings -> Serial port will be displayed.
IP address 192.168.1.1 Subnet mask 255.255.255.0
Network/LAN
DHCP USE, Unuse
The setting for Settings -> Network settings -> LAN -> IP address will be displayed.
Settings Cont’d
Information
Network/WAN Global IP address
The IP address assigned from WAN will be displayed.