10.2 Status monitor
10-6
10.2.2 Tracking status
1. Satellite
The name of the satellite currently being searched for / acquired is displayed. As for the
satellite coverage, refer to page 1-3.
The satellite settings can be made via; Settings -> Basic settings -> Satellite.
You can also confirm the satellite position and the frequency for the common channel
upon this screen.
x APAC : This satellite covers Asia-Pacific region. The ID number of the
satellite is “05”, and it is a I-4 satellite positioned at 143.5E.
x EMEA : This satellite covers the Europe, Middle East, and Africa region.
The ID number of the satellite is “06”, and it is a I-4 satellite
positioned at 25.1E.
x AMER : This satellite covers the Americas. The ID number of the satellite is
“07”, and it is a I-4 satellite positioned at 97.6W.
2. Channel
The global beam channel currently being searched for / acquired will be displayed.
In normal cases, search will be made starting from the Primary channel, and if that
channel cannot be acquired, the search will be continued by switching the target channel
to Alternate channel.
As for the Satellite acquiring sequence, refer to page 11-20.
Satellite Primary Alternate
APAC 1537.485 MHz 1540.825 MHz
EMEA 1537.920 MHz 1541.115 MHz
AMER 1537.070 MHz 1540.730 MHz
To Next Page
Loading...
Need help?
General
