Furuno FELCOM 500

6. Click (a) 機器検索 box. Detected incoming Indicator(s) is listed in “
IP Address～
Program Version”
7. Click (b) rom.bin の転送 box. Information window appears, then click “OK”.
8. Program update starts and IP Address ~ Program Version of Incoming Indicator
disappears from the list. When it is displayed in the list again, version up of rom.bin is
completed.
9. Click (c) image.bin の転送 box. Information window appears, then click “OK”.
(a) (c)
(b)
(d)
MAC address and Program version display.
When character color is pink, it is Default address 00-40-9D-43-35-97. It must be
re
p
ro
g
rammed. When character color is blue
,
it is
p
ro
g
rammed address.
IP address and program version
appears when completed.
4/7