Check List
iv
2.3 Main -> Status monitor
Item Checked Note
Satellite
Antenna elevation
Signal strength
Note-1)
St-by:
CS call:
Tracking status
Using GPS
Note-2)
Latitude
Longitude
Ship position information
HPA (Temperature)
IF (Temperature)
Modem (Temperature)
Temperature information
Note)
1. When communication is not established, the signal strength should be of the
Regional Beam receiving level. When the line is connected, Spot beam will be used
and therefore the receiving level will rise.
For example,
in case of FELCOM-500, it will rise from 60 dB/Hz to 70 dB/Hz,
in case of FELCOM-250, it will rise from 55 dB/Hz to 65 dB/Hz.
2. As for the confirmation for the External GPS, execute GPS Monitor by selecting
Settings -> Basic settings -> GPS, and confirm that the data is being input.
To Next Page
Loading...
Need help?
General
