2. IP HANDSET OPERATIONS
2-4
Press the key to return to the [History] screen. If you call the number, press
the Enter key, then go to step 6.
5. Select [Call].
6. Press the key to place a call.
7. Complete the conversation.
8. Press the key or replace the IP Handset in the cradle to end the call.
9. Press the key to go back to the main screen.
How to call from the [Contacts] list
A number can be dialed directly from the [Contacts] list. For more information about
the [Contacts] list, see section 2.2 for IP Handset, or section 5.5 for Communication
Unit.
1. At the main screen, press the key to open the [Contacts] list.
Note: If no numbers are stored in the [Contacts] list, "No List." appears.
2. Press S or T to select a contact.
3. Press the key.
Note: Press the Enter key to display the complete information of the selected con-
tact.
㻜㻜㻤㻝㻣㻥㻤㻢㼄㼄㼄㼄㼄
Error code (Shown only when an error occurs.)
Phone number
(Displays name if registered in [Contacts] list.)
Day/month, time
Communication time
Icon
To Next Page
Loading...
