Furuno FS-1503 - Frequency Ranges for Power Adjustment; Default Setting of Power Data

4-13
Frequency Ranges for Power Adjustment
Power data can be set on following frequency ranges and classes of emission,
(Marked by “
•
”). Power data for user channel is entered for all classes of emission.
HI Power LOW Power
J3E H3E TLX J3E H3E TLX
BAND
1.6 - 1.9999
•••
2.0 - 2.4999
•••
2.5 - 2.9999
•••
3.0 - 3.4999
•••
3.5 - 3.9999
•••
•••
4.0 - 5.9999
••••••
6.0 - 7.9999
••••••
8.0 - 11.9999
••••••
12.0 - 15.9999
••••••
16.0 - 17.9999
••••••
18.0 - 21.9999
••••••
22.0 - 24.9999
••••••
25.0 - 29.9999
••••••
ITU Channel
Using above data for each frequency range and in each emission modes.
User Channel
0 - 01 to 99
1 - 00 to 99
Power data is set on each channel.
Using above data for each frequency
range and in each mode.
[2182] key
•
Power data entered for 1.6 - 3.9999
MHz.
Default setting of power data
⋅
Standard and USA (150 W): 220
⋅
Thai (100 W): 170
⋅
LOW (60 to 70 W): 140
⋅
TUNE (10 W): 40