Furuno FS-1503 - 4.5 BC Band Filter Setting

4-17
4.5 BC Band Filter Setting
If MF/HF band is interfered with broadcast(BC) band, change jumper settings J8 and J9
from "2" to "1."
Position "1": Receiving frequency range from 1.6 MHz to 30 MHz
Position "2": Receiving frequency range from 0.1 MHz to 30 MHz
PA / FIL Board
J8
J9
0.1 to 30 MHz
1.6 to 30 MHz
SW REG Board
(
OPTION
)
2
1
2
1
Factory-Setting
[ ]
2
BC BAND FIL
2
1
1.6 MHz HPF (High Pass Filter) is added on the receiving line with jumpers 8 and 9 set
to "2".