Furuno NAVpilot-711C - Distributor FAP-6800 (Option)

1. INSTALLATION
1-12
How to flush mount the FAP-6221 with flush mount kit OP64-5
1.5 Distributor FAP-6800 (option)
Use the Distributor to connect three Non-Follow Up-type remote controllers to the Proces-
sor Unit. Fix the unit to the mounting location with wood screws. For added support, use
nuts, bolts and washers (all local supply) instead of the wood screws.
135
(5.3”)
135
(5.3”)
MAX.25(0.98”)
Hex. bolt
Spring washer
Hex. nut
Fixing plate
Pan head screw
M3x20
(local supply)
Rubber ring
60(2.36”)
37(1.46”)
172(6.77”)
60(2.36”)
8(0.3”)
156(6.14”)
172(6.77”)