Furuno RC-1800T User Manual

7-9
7.8.2 Routine frequencies
1. Press the [#/SETUP] key, select SCAN FREQ and press the [ENT] key to display the Scan
freq menu.
DISTRESS
2M :
FIXED
4M : ON
6M : ON
8M :
FIXED
12M : ON
16M : OFF
**
Scan freq setup
*
ROUTINE
F1 : 2M-INTL
F2 : 4M-INTL
F3 : 6M-INTL
F4 : 8M-INTL
F5 : 16M-INTL
F6 : 25M-INTL
2. Select the frequency to process and press the [ENT] key. For example, select 2 MHz.
ROUTINE
F1 : 2M-INTL
F2 : 2M-USR3
F3 : 4M-INTL
F4 : 8M-INTL
F5 : 16M-LCL1
F6 : 25M-LCL2
DISTRESS
2M :
FIXED
4M : ON
6M : ON
8M :
FIXED
12M : ON
16M : OFF
**
Scan freq setup
*
OFF
2 MHZ
4 MHZ
6 MHZ
8 MHZ
6
5
12 MHZ
16 MHZ
22 MHZ
25 MHZ
OTHER
Use 6 to scroll
the menu.
3. Press the [ENT] key, and the display looks something like the one below.
ROUTINE
F1 : 2M-INTL
F2 : 2M-USR3
F3 : 4M-INTL
F4 : 8M-INTL
F5 : 16M-LCL1
F6 : 25M-LCL2
DISTRESS
2M :
FIXED
4M : ON
6M : ON
8M :
FIXED
12M : ON
16M : OFF
**
Scan freq setup
*
INTL : T12577.5/R12657.0
LOCAL1 : T12578.0/R12657.5
LOCAL2 : T12578.5/R12658.0
6
4. Select frequency desired and press the [ENT] key. INTL are international channels and
LOCAL1/LOCAL2 are local channels. Pressing

selects USER CH, for entry of user
channels (where permitted). Note that selecting OTHER at step 2 displays “**M”.
5. Press the [CANCEL] key twice to return to the DSC standby screen.

Furuno RC-1800T Specifications

General

Brand	Furuno
Model	RC-1800T
Category	Receiver
Language	English