2 – 5
2.3 Printer PP-510
Turning on the power
Turn on the POWER switch at the front of the printer. The POWER and ON LINE lamps light.
The printer is now ready to print. If the ON LINE lamp is off, press the ON LINE switch to turn
it on; you cannot print when the ON LINE lamp is off.
P.PARK
FF
LF
NLQ
ON LINE
POWER Lamp
P.OUT Lamp
Lights when paper runs
out or internal error
is found.
Toggles between online
and offline state.
These keys are operative when the
printer is in off line state (ON LINE
lamp is off).
POWER
Switch
Key description
[NLQ] (Near Letter Quality) key
Toggles between draft and NLQ print modes. Lighting the key selects near letter quality (high
quality) print.
[LF] key
Advances the paper one line. Press and hold down the key to advance the paper continuously.
[FF] key
Advances the paper to the top of the next available form. The default form length is 11 inches.
[P.PARK] key
Backs the paper by maximum 18 inches. If the paper is not detected after backing it, the P. OUT
lamp blinks three times and the printer stays in offline state.
To Next Page
Loading...
Need help?
General
