4-6
How to set working frequency
When you send a call set the working frequency as below to communicate with the receiver of
the message. The working frequency can be entered by Tx and Rx and frequencies as below or
channel no. as in “Channel” on the next page.
Routine or ship's business priority
For FREQUENCY or CHANNEL follow one of the sections below.
Frequency
a) Select FREQUENCY and press the [ENT] key.
KHZ
KHZ
RX: 0. 0
TX: 0. 0
b) Key in Tx frequency in five or six digits with the numeric keys and press . For example,
enter 12329.0 kHz. If you make a mistake, press the [CANCEL] key and then reenter data.
TX: 12329.0 KHZ
KHZ
RX: 0.0
Note: Working TX and RX frequencies in the message can be selected to 0.0 kHz so that no
information about frequencies is sent out.
c) Enter Rx frequency and press the [ENT] key. The Tx frequency entered appears in the COM.
FREQ field.
***
Send message
***
GO TO ALL VIEW
CALL TYPE:
STATION ID:
PRIORITY
COM. TYPE
COM. FREQ
DSC FREQ
INDIVIDUAL
123456789
: ROUTINE
: TELEPHONE
TX:12329.0 KHZ
: 12M-INTL
DSC FREQ : 12M-INTL
To Next Page
Loading...
Need help?
General
