Furuno RC-1800T - Saving Receive Messages to a Floppy Disk; Automatically Saving Receive Messages

4-24
Saving receive messages to a floppy disk
1. Press [F6].
2. Press [2] to display the Receive Message Log.
Receive Message Log
Message No.
R0971106.001
R0971105.002
R0971105.001
R0971101.001
R0971024.001
LES
Perth
ABCDEFGHIJ
Perth
Perth
Perth
Priority
Normal
Normal
Distress
Normal
Normal
Addressee
CAPTAIN
OFFICER
Rec date & Time
97-11-06 16:10
97-11-05 17:30
97-11-05 14:15
97-11-01 3:45
97-10-24 13:20
Status
Saved
Printed
Printed
Printed
Saved
Memory Available: 3317 Bytes
Size
32767
200
1234
3256
8251
Enter: Display S: Save D: Delete
Figure 4-33 Sample delete message screen
3. Select a file. To display a portion of the file selected, tap the space
bar.
4. For confidential messages enter password. This password will also
be saved to the floppy disk.
5. Press [Enter] to copy the file to the floppy disk. “Saving to FD”
appears during saving.
Note: If a file by that name already exists on the floppy disk,
“A file by that name already exists on FD.” appears.
Automatically saving receive messages
1. Press [F8].
2. Press [6] to display Auto Mode Setup menu.
Setup
7. E-Mail Setup
8. Directories
9. Configuration
Auto Mode Setup
Auto Log Print
Receive Alarm
Auto Telex Msg Save
Auto EGC Msg Save
OFF
ON
ON
OFF
Figure 4-34 Auto mode setup menu
3. Press [
/
] to select “Auto Telex MSG Save”.
4. Press [Enter] to open the selection window.
5. Select “ON”.
6. Press [Enter] to close the selection window.
7. Press [Esc] twice.